Laser Cutting

  • Laser Cutting will cut Aluminum, Stainless, Nickel Alloys, Titanium & Steel.
  • Aluminum up to 0.187” thick, Steel up to 0.625” thick & Stainless up to 0.250” thick.
  • Heat is generated on the cutting process
  • Minimum thickness = 0.005” thick
  • Maximum thickness = 0.625” thick
  • Minimum part size = 0.500” x 0.500”
  • Maximum part size = 59.50” x 119.50”
  • Hole Sizes = Minimum hole size is based on the thickness of the material being cut. Its typically a one to one proportion. For example, a 0.125” thick material requires a minimum hole size of 0.125”
  • Typical tolerances:
  • Holes +/-0.005”
  • Hole Location +/-0.005”
  • Profile +/-0.010”
  • Minimum Part spacing is 0.200” between parts and a 0.500” space all around the sheet is required to allow us to clamp material to Laser table. Thicker materials will require more space.
  • Laser cutting will leave a sharp edge and cut will have a Shiny look with some striations which will vary depending on Material being cut and Assist gas used.
  • If your parts don’t fit this guideline, feel free to contact us to discuss your project.